Product Brochure

PitBull Tongue and Groove Pliers
• K9 Jaw Design grips
even when working
at an angle
• Slim profile jaws for 40%
greater access
• Ergonomic handles with
tether point increase
overall comfort and
safety*
Cat. No. Description Jaw Positions Overall Length Jaw Length Jaw Width Jaw Thickness Jaw Capacity Jaw Type Weight (lbs)
82168C 8" V Jaw T&G Cushion Grip 8 8.5" 1" 1.1" 0.33" 1.6" V-Jaw 0.5
82169C 8" Straight Jaw T&G Cushion Grip 8 8.5" 1" 1.1" 0.33" 1.6" Straight Jaw 0.5
82168 8" V Jaw T&G Dipped Handle 8 8.1" 1" 1.1" 0.33" 1.6" V-Jaw 0.5
82169 8" Straight Jaw T&G Dipped Grip 8 8.1" 1" 1.1" 0.33" 1.6" Straight Jaw 0.5
82170C 10" Straight Jaw T&G Cushion Grip 8 10.8" 1.25" 1.4" 0.38" 2.1" Straight Jaw 0.8
82172C 10" V Jaw T&G Cushion Grip 8 10.8" 1.25" 1.4" 0.38" 2.1" V-Jaw 0.8
82170 10" Straight Jaw T&G Dipped Handle 8 10.2" 1.25" 1.4" 0.38" 2.1" Straight Jaw 0.8
82172 10" V Jaw T&G Dipped Handle 8 10.2" 1.25" 1.4" 0.38" 2.1" V-Jaw 0.8
82171C 12" Straight Jaw T&G Cushion Grip 8 12.8" 1.8" 1.8" 0.42" 2.6" Straight Jaw 1.5
82173C 12" V Jaw T&G Cushion Grip 8 12.8" 1.8" 1.8" 0.42" 2.6" V-Jaw 1.5
82171 12" Straight Jaw T&G Dipped Handle 8 12.1" 1.8" 1.8" 0.42" 2.6" Straight Jaw 1.5
82173 12" V Jaw T&G Dipped Handle 8 12.1" 1.8" 1.8" 0.42" 2.6" V-Jaw 1.5
82166 16" Straight Jaw T&G Dipped Handle 8 16.5" 2.5" 2.5" 0.58" 4.2" Straight Jaw 3.2
82167 16" V Jaw T&G Dipped Handle 8 16.5"
2.5"
2.5"
0.58"
4.2" V-Jaw 3.2
FOR NON-MARRING GRIP
GRIP ZONE HANDLES
40% GREATER ACCESS
SLIM JAWS FOR
• Pinch-stop design prevents handle
pinching palm or fingers
• Grip Zone handles for
non-marring grip
PitBull Slip Joint Pliers
• Ergonomic handles with
tether point increase
overall comfort and
safety*
• Deep shear style wire cutter
reduces cutting effort
• Cross hatched jaw tooth
design for gripping and pulling
• Grip Zone handles for non-marring grip
Cat. No. Description
Wire
Cutter
Edge Type
Cut
Capacity
Jaw
Positions
Overall
Length
Jaw Length Jaw Width
Jaw Thick-
ness
Jaw
Capacity
Jaw Type
Weight
(lbs)
82174C 6" Slip Joint Plier Cushion Grip Yes BY PASS AWG12 2 6.8" 1.35" 1" 0.42" 1.25" Curved 0.4
82174 6" Slip Joint Plier Dipped Handle Yes BY PASS AWG12 2 6.4" 1.35" 1" 0.42" 1.25" Curved 0.4
82175C 8" Slip Joint Plier Cushion Grip Yes BY PASS AWG11 2 8.7" 1.35" 1" 0.42" 1.5" Curved 0.6
82175 8" Slip Joint Plier Dipped Handle Yes BY PASS AWG11 2 8.1" 1.35" 1" 0.42" 1.5"
Curved 0.6
*Tether Point is only available on Cushion Grip Pliers
• Tongue and Groove, Long Nose, Universal,
Linesman and Diagonal pliers are also
available with dipped handles
TETHER
READY
TETHER
READY
DESIGNED FOR GRIPPING
CROSS-HATCHED TEETH
FOR NON-MARRING GRIP
GRIP ZONE HANDLES
4MM TO OVER 32MM
MAX GRIP FROM