User manual

EN
MCA1215 – MCA2440 Connecting the device
53
Charging using the battery management system PerfectControl
MPC01 (accessory)
➤ Set the DIP switches 1 to 3 on the MCA battery charger to “ON” (chapter
“Setting the DIP switches” on page 56).
You can find detailed information in the operating manual for MPC01.
Charging using the remote control MCA-RC1 (accessory)
I
➤ Insert one end of the RJ-11 cable into the socket (fig. 0 3, page 7) of the
MCA-RC1.
➤ Insert the other end of the RJ-11 cable into the TEMP/LIN1 socket on the
MCA battery charger.
8.3 Wiring diagrams
Example of a wiring diagram, 12 V: see fig. 5, page 6.
NOTE
The length of the RJ-11 cable may not exceed 7 m.
No. in
fig. 5, page 6
Explanation/function
1 MCA charger
2 Consumer
3 PerfectControl MPC01
4 12 V battery sensor IBS
5 12 V battery
6Fuse
7 Starter battery