User manual

MCA1215 – MCA2440 Using the device

When you have connected the remote control MCA-RC1 (accessory)

➤ Activate or deactivate sleep mode (noise reduced mode) using the “Sleep

Mode” button (fig. 0 2, page 7).

The fan is not regulated in sleep mode.

✓ The LED (fig. 0 1, page 7) on the MCA-RC1 indicates the operating sta-

tus (see following table).

Mode Display Meaning

Sleep mode

activated

Orange, constantly

lit

Phase 1 to 5

Sleep mode

deactivated

Green, slowly flash-

ing

Phase 1 to 4

Green, constantly lit Phase 5

Fault Red, constantly lit Short circuit or defective fuse

Red, quickly flash-

ing

Battery or battery charger is over-

heating

Red, slowly flashing Battery undervoltage or overload

Red, double flash Fan fault

Red, slow double

flash

Fault at the starter battery connec-

tion

NOTE

In the event of a fault (the Status LED is red), refer to chapter

“Troubleshooting” on page 60).