Pivot Stepper™ by Wagan® PARTS DIAGRAM 5 4 6 9 7 3 10 8 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Base Lower tube Upper tube Handle bar LCD meter Meter bracket Handle bar cover Bolts for tube (1") Bolts for handle ( 3/4") Washers 8 10 2 10 8 8 A 10 1 3 www.wagan.
User’s Manual—Read before using this equipment ASSEMBLY 2 2 8 8 A 1 1. Run the Power Cable (A) connected to the Base (1) through the Lower Tube (2). 10 1 10 2. Connect the Lower Tube (2) to the Base (1) with the supplied Bolts for Tube (8) and Washers (10). 3 3 A 10 10 8 8 8 8 2 10 3. Run the Power Cable (A) 2 through the Upper Tube (3). 2 10 4. Connect the Upper Tube 2 (3) to the Lower Tube (2) with the supplied Bolts for Tube (8) and Washers (10). ©2016 Wagan Corporation.
Pivot Stepper™ by Wagan® 5 5 6 6 A 3 3 5. Run the Power Cable (A) through the Meter Bracket (6) and connect it to the underside of the LCD Meter (5). 6. Cap the Meter Bracket (6) onto the top of the Upper Tube (3) then slide the LCD Meter (5) onto the bracket from the back to the front. 4 3 9 7 7. Connect the Handle Bar (4) to the Upper Tube (3) with the supplied Bolts for Handle (9). 5 8. Snap the Handle Bar Cover (7) onto the Handle Bar (4) where the Bolts for Handle (9) were inserted.
31088 San Clemente Street Hayward, CA 94544, U.S.A. Tel: +1.510.471.9221 U.S. & Canada Toll Free: +1.800.231.5806 customerservice@wagan.com www.wagan.com ©2016 Wagan Corporation. All Rights Reserved Wagan Tech and wagan.
