O W N E R’S MA N U A L MARINE KETTLE COMBINATION, STOVE & GAS GRILL A10-207-3 • A10-207-3-CE-2 A10-217-3 • A10-217-3-CE-2 ® ® For questions regarding per assembly, operation, parts, o contact the experts at MAGM by calling TOLL FRE 1-800-86-MAG 7:00 a.m. - 5:00 p.m. Pacific Time Monday thru Fr or e-mail us at magmamail@aol.com For questions regarding performance, assembly, operation, parts, or returns, contact the experts at MAGMA by calling (562) 627-0500 7:00 a.m. - 5:00 p.m.
A10-207-3, A10-207-3-CE-2, A10-217-3, A10-217-3-CE-2 IMPORTANT SAFETY WARNINGS • READ ALL INSTRUCTIONS BEFORE OPERATING • USE OUTDOORS ONLY. • DO NOT USE THIS APPLIANCE INSIDE THE BOAT OR ANY ENCLOSED SPACE. • GRILL RADIATES HEAT, CLEARANCE FROM CUMBUSTIBLES, 24” (61 cm) SIDE AND BACK, NEVER USE UNDER AWNINGS, PATIO COVERS, ETC • CAUTION: ACCESSIBLE PARTS MAY BECOME VERY HOT. KEEP YOUNG CHILDREN AWAY FROM THE APPLIANCE. • NEVER LEAVE HOT GRILL UNATTENDED. A • USE GLOVE OR HOT PAD WHEN HANDLING HOT GRILL.
CONTENTS Grill Grate For Models A10-207-3 & A10-217-3 Control Valve/Regulator Type 1 Low-Output For Models A10-207-3-CE-2 & A10-217-3-CE-2 Control Valve/Regulator Type 2 Low-Output Grill Body Dome Indexing “L” Bracket & Clamp Assembly Tool Needed Turbo Venturi Tube Assembly 9/16” Wrench not included Radiant Plate Each Magma® Gas Grill is individually fire tested before it leaves the factory. For this reason, the burner on your grill may be slightly discolored.
Grease Tray Pins Threaded Burner Pipe Grease Tray 5 5a 5b 5c 5d 5 With grill body tightly attached to L-Bracket and taking care not to damage electrode, unthread burner 3 full revolutions only. CAUTION: DO NOT UNTHREAD MORE THEN 3 REVOLUTIONS, AS GRILL MAY FALL OVERBOARD. • Lift entire grill up to disengage from grease tray positioning pins (5a & 5b) and rotate so lid operates freely in desired position (5a).
CONNECTING FUEL SOURCE CONTROL VALVE REGULATOR A10-207-3 and A10-217-3 • Uses standard 1-lb. disposable propane canisters (DOT-39 NRC). • Prior to installing valve, become familiar with the valve function and graphics on valve knob. Never force the knob. Always turn or push gently. • Turn control valve to “LOCK” and install gas canister being careful not to cross the threads. Check for leaks prior to use, by brushing soapy water solution around threads and orifice hole checking for bubbles.
USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS Gently insert valve stem into venturi tube upside down until fully inserted and rotate as shown. Typical Boat and R.V.
OPERATING PROCEDURES WARNING: Do not overheat grill. Magma grills do not require pre-heating. Stainless Steel loses anti-corrosive characteristics when subjected to extreme heat. Most grilling is done on low temperature with the lid closed. If medium or high heat is required, grill with lid open. LIGHTING INSTRUCTIONS • Open lid during lighting. • Depress knob & rotate counter-clockwise to the “HIGH” position. • Push Electronic Pulse Igniter. • Visually confirm ignition. • Turn knob to adjust flame.
USING THE MARINE KETTLE AS A STOVE Magma’s patented, unique design of the Marine Kettle allows it to be used as a conventional stove. This permits you to fry, saute, boil, wok, etc. • Remove the grill grate. • Remove the radiant dome • Adjust flame to proper cooking temperature. • For smaller pots and pans, place the cookware directly on the three tongs of the radiant plate. • For larger pots and pans, including woks, invert the radiant plate and place the cookware directly on the radiant plate.
REPLACEMENT PARTS A10-207-3 “Original” Size A10-217-3 “Party” Size A10-207-3-CE-2 “Original” Size A10-217-3-CE-2 “Party” Size Cooking Grill Radiant Plate Burner Fire Pan Complete Handle Assembly & Fasteners Lid w/hinge & fasteners (no handle) Bowl Electronic Pulse Igniter Igniter Case Grease Tray “L” Bracket & Clamp Assembly Turbo Venturi Tube For Models A10-207-3-CE-2 & A10-217-3-CE-2 Control Valve/Regulator Type 2 Low-Output For Models A10-207-3 & A10-217-3 Control Valve/Regulator Type 1 Low-Outpu
TROUBLE SHOOTING GUIDE Problem Possible Cause Possible Solution Burner will not light with igniter Electrode covered with grease or residue Electrode wire loose, disconnected, or corroded Clean electrode Wire is shorted causing spark from wire before electrode No spark being generated Burner will not light even with match No gas flow Obstructed gas flow Flare-up Excessive cooking temperature Yellow sooty flame Grease and/or residue build-up Excessive fat in meats Excessive oils in marinades Obst
ACCESSORIES Magma® Marine Kettle® Grill Cover/Tote Bag Original & Party Size Luggage Quality Padded Grill & Accessory Carry/Storage Case Fits grills up to 17” dia. (43 cm) Fully “Nesting,” 7 & 10 piece, 18-10 Stainless Steel Cookware Sets with Stainless Steel or Ceramica Non-Stick Interiors. Stainless Steel, Cobalt Blue, Jet Black, or Magma Red enamel exteriors and Induction compatible models available.
LIMITED WARRANTY Magma Products, Inc. guarantees this product to be free from defects in materials or workmanship to the original consumer. This guarantee is for the periods herein specified when used under normal and reasonable conditions, one (l) year from the date of original purchase. This warranty does not include the cost of property damage or any inconvenience due to the failure of the product.
