Installation Guide

e Vintage Wood Floor Company VintageWoodFloors.com
e Antique Barrel Collection AntiqueBarrelCollection.com
714-557-9655
[e-mail]
diy stacked
wall panels
Installation Guide
If you have questions during installation or about your purchase, please call 949-244-5123. DO NOT return to retailer.
Congratulations!
You’ve made a wise choice. You’ve chosen authentic reclaimed
wall panels that have no equal. We at The Vintage Wood Floor
Company and our sister brand Antique Barrel Collection, are
one of the nation’s largest and oldest manufacturer of products
produced from reclaimed American barn wood, wine, and
whiskey barrels.
No two pieces of wood are alike, and this rule applies even
more so to reclaimed wood. You’ll nd a wide variation
between panels that will stir conversation in your space for
years to come.
We know you’re excited to get started, but it’s important to
plan your work, then follow your plan.
These tips apply to all of our stacked wood paneling including,
Reclaimed Barn Wood, Wine Soaked Oak Barrel, & Whiskey
Barrel.
Layout
To start, carefully remove the panels and lay them out (face up)
so you can get an overview of the color and texture variation
we’ve included in your kit.
Once you are happy with and understand the general layout,
it’s time to proceed. For every panel you need to install, plan on
about 5 minutes. Remember: Measure twice, cut once.
Note: the mesh backing is to keep the panel pieces together
while you position the panel. It is not meant to have any
structural support beyond this purpose. Should a piece come
loose, simply put it back in place, and nail/glue as normal.
We’ve given some tips to guide you, but go ahead and get
creative!
We’re very proud of these panels and you will be too. We’d
love to see your nished product--email us pictures at
marketing@vintagewoodoors.com!