Installation Guide

Step #4: Fasten end post to window rails using the screws provided (five (5)
screws on each side). Screws must be fasten into a solid stud or frame for
guard to work properly. (See: Fig. 2)
Step #5: After end post are securely installed, test the AC Window Guard by
pulling each end towards the center of window and towards you.
Step #6: Upon installation of the AC Window Guard, open and close the
window to ensure that normal operation of the window is not restricted.
Step #7: Install your Air Conditioner (follow Air Conditioner manufacturer’s
installation instructions).
Step #8: Once the installation of the Air Conditioner unit is completed, install
the L angle/window stop (provided) on each side of the window to prevent
anyone from opening the window. (See: Fig. 3)
Available AC Window Guard models:
Model #1
For window opening ranging from 20-30 inches (Extends a maximum of 30 inches)
Model #2
For window opening ranging from 30-40 inches (Extends a maximum of 40 inches)
Model #3
For window opening ranging from 40-50 inches (Extends a maximum of 50 inches)
Window size must be measure before purchasing one of the three available AC
Window Guard models.
Manufacturer recommends that the AC Window Guard be installed by a
licensed professional (tradesmen) only.