Installation Guide

Event Notifications
If your phone is off when the doorbell captures a motion event you will
receive a push notification on your phone.
If your phone has a passcode,
you will need to enter it to
veiw the event.
Motion Detection Zones
To setup motion alerts you must set up motion zones. These are areas or
“zones” that the camera uses to determine when a motion detection is detected
and can range from 0 to 100%.
To setup motion detection, tap on the settings ( ) icon and tap “Motion
Detection”. Select applicable zones, one through three or use the slider to adjust
the motion detect percentage. Tap on the save icon ( ) to save the motion
settings.
You will need at least one active motion zone to receive event notifications.