Installation Guide

Replace Your Chime Cover

Installing the

Wi-Fi Doorbell

Everything you need for the

installation of your Amcrest Wi-Fi

doorbell is included in the box.

Wi-Fi Doorbell

4 Mounting

Screws

2 Terminal

Screws

Wire Connector 2 Wire Nuts

2 Faceplates Mounting Bracket

Bracket Screw

4 Wall Anchors

Chime Kit

2 Extra Wires

Screwdriver

2 Wire

Extenders

Wire Harness

Secure the Amcrest Chime Kit using the included adhesive. If you are

using a mechanical chime, ensure any excess wiring is clear of all

moving parts.

Note: You will still need to configure the chime in the Amcrest Smart

Home app to complete the installation.

NOTE

A 15/64 masonry drill bit will be required if installing

on concrete stucco or brick.