STAND PET DRYER OWNER’S MANUAL Model No. B-16 XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776 USA Tel: (626) 285-3301; Fax: (626) 285-3302 www.xpower.
Table of Contents Introduction .............................................................................................................................. 1 Operation / Instructions................................................................................. .............................. 2 Instructions for Professional Features………………………………………………………………………………………3 Adjustment / Accessories..................................................................................... ........................
Introduction XPOWER B-16 Stand Pet Dryers are designed and engineered to be powerful, super lightweight, energy-efficient and safety certified professional level pet dryers. The B-16 model comes with many unique, revolutionary features. Its BRUSHLESS DC MOTOR produces large volumes of air and wide range of air adjustment. The ANION TECHNOLOGY provides negative ionization and gives the dryer a low static drying capability.
Operation / Instructions XPOWER B-16 Stand Dryers are designed for hands-free pet drying. 1. Carefully follow the assembly instructions. Inspect the unit completely for any shipping damage or missing parts. 2. Upon assembly, place the dryer on a flat surface. Plug the electrical cord into a 3-prong GFCI outlet. 3. Turn on the AIR FLOW switch to desired speed. 4. If heat is required, turn heat switch to position 1 (for low heat) or position 2 (for high heat). 5.
Instructions for Professional Features Heat Switch: Position 1 for low heat Air Flow Switch: Position 2 for high heat The Air Flow Control is also the ON / OFF switch. Select desired temperature setting. ANION Switch: The Anion Function offers ANION low static air flow during Grooming.
Adjustment / Accessories Turn handle clockwise to tighten, counter- clockwise to loosen. Accessories - Filter A filter is included in the XPOWER B-16 Pet Dryer, which will Tiltable head for different angle help prevent small debris and pet hair from entering the unit. positions To clean the filter, remove the filter from the unit and wash with warm soapy water, rinse with clean water and let dry thoroughly before reinstalling.
Specifications Volt / Cycle 115 V / 50-60Hz Cord Length 13 Ft. Motor 1/4 HP Rated Airflow 300 CFM Max. Amp 12 Amps. Heater Duo Setting Weight 17 Lbs. Housing ABS Speeds Variable (Stepless) Safety Marks ETL / C-ETL ANION YES Filter System YES Assembly 1. 2. 3. 4. Unfold the patented foldable 5-leg stand. Attach the five wheels to the stand base. Attach the lower stand pipe to the base by screwing the pipe to the center screw in the base. Attach the dryer motor to the top stand pipe.
-6-
Installation Tips and Hints Part # 8 & # 9 Open Foldable Stand Legs and push Leg Wheels in to Foldable Stand Legs. Part # 6 & # 7 Make sure parts 6 & 7 are screwed together tightly until the pipe comes in contact with the foot stand. Part # 3 & # 4 Connect Upper Stand Pipe to Dryer Motor Assembly. Part # 2 & # 3 There are notches on both straight hose and motor. Assemble and align them properly before joining them together, then screw them in tightly.
Safety Instructions WARNING: IMPORTANT SAFETY PRECAUTIONS! PLEASE READ COMPLETELY BEFORE USING PRODUCT! When using electrical appliances, especially when children or animals are present, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. These include, but are not limited to the following: Do not leave the dryer and animal unattended while the product is in use. Unplug dryer when not in use.
XPOWER Limited Warranty XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty covers normal use for a term of one year from original date of purchase; including parts, labor and one way shipping. XPOWER ‘motor housing’ is covered for a term of five years from the date of the original purchase.
Maintenance Instructions To keep the dryer clean, use a damp cloth to wipe the surface of the housing. Never clean the unit with water. When not in use, unplug and store the XPOWER Pet Dryer in a dry indoor place out of reach of children. Always disconnect the XPOWER Pet Dryer from its power source before performing any maintenance or cleaning. Clean the filter as often as necessary to avoid loss of airflow.
WARRANTY Please complete and mail or fax this form for your product warranty. For multiple units, please Address: XPOWER serial numbers on a separate sheet of paper. INC.
From: __________________________________ ___________________________________ ___________________________________ TO: XPOWER MANUFACTURE, INC.