SDS

SAITE POWER SOURCE(VIETNAM) CO.,LTD
SAITE POWER SOURCE (VIET NAM) CO.,LTD
Add:Road No.6,An Phuoc IP,An Phuoc Ward,Long Thanh District,Dong Nai Province,Vietnam
Tel： [phone] Fax： [phone]
Website：www.saitebattery.vn E-mail： [e-mail]
apparatus.
ABS Plastic
None
N/A
Temp. over 300°C(573℉) may
release combustible gases. In
case of fire: wear positive
pressure self-contained
breathing apparatus.
Protective Equipment and precautions for Firefighters
As in any fire,wear self-contained breathing apparatus pressure-demand,
MSHA/NIOSH(approved or equivalent) and full protective gear.
Section 6---Accidental Release Measures
Steps to take in case of leak or spill:
If sulfuric acid is spilled from a battery, neutralize acid with bicarbonate (baking soda), sodium
carbon (soda ash), or calcium oxide (lime). Flush area with water and discard to the sewage
system. Do not allow neutralized acid into sewage system.
Section 7--- Handling & Storage
1) Examine the appearance of the battery before use.
2) Store the battery in a cool place.
3) Recharge the battery that has been stored more than 3 months.
4) Charge the battery in a well-ventilated environment.
5) Secure the battery firmly installed in equipment.
6) Don’t load and unload the battery roughly.
7) Prohibit to dissecting the battery.
8) Don’t attempt to use a cracked, deformed or leaky battery.
9) Don’t subject the battery to excess vibration or violent jolted.
10) Prohibit to burning the battery or put it near the fire.
Section 8--- Exposure Controls/ Personal Protection
SKIN: Rubber gloves, Apron
RESPIRATORY: Respirator (for lead)
EYES: Safety goggles, Face Shield
COMMENTS: Protective equipment must be worn if the battery is cracked or otherwise damaged.
A respirator should be worn during reclaim operations if the TLV is exceeded.
Section 9---Physical & Chemical Properties
Components
Density
Melting
Points
Solubility in
Water
Odor
Appearance
Lead
11.34
327.4°C
None
None
Silver-Grey
Metal
Lead Sulfuric
6.2
1070°C
40mg/L(15°C)
None
White Powder