Instructions / Assembly

Step 3

NOTE:

Some hardware components may be pre-assembled. Be aware of

Nylon lock nuts not fully screw onto bolts, they must be tightened

with a wrench to ensure proper engagement.

3A. Attach Handle Bar (C) to Upright (B) using:

Four M8x16mm Button Head Cap Screw (#17)

Four M8 Lock Washer (#19)

Four M8 Flat Washer (#20)

3B. Connect Wire Harness (#15) & Heart Rate Cable (#16) to the

Cables of the Console (H)

3C. Attach Console (H) to Handle Bar (C) using:

Four M5x10mm Pan Head Phillips Screw (#29)

3D. Attach L Shape Holder (L) to Console (H) using

Two M5x10mm Pan Head Phillips Screw (#29)

4E. Attach the Water Bottle Holder (K) to Upright (B) using:

Two ST4.2x18mm Pan Head Phillips Screws (#26)

Two 9x4mm Flat Washer (#27)