Instructions / Assembly

Step 4

NOTE:

Some hardware components may be pre-assembled. Be aware of

Nylon lock nuts not fully screw onto bolts, they must be tightened

with a wrench to ensure proper engagement.

4A. Loosen Threaded Stub Knob (#12) by turning counter-clockwise.

Insert Seat Frame (D) into the Main Frame (A).

4B. Attach Adjustment Bracket (E) to Seat Frame (D) using:

One T-Bracket (#22)

One Bushing (#14)

One Knob (#13)

4B. Attach Seat Pad (#23) to Adjustment Bracket (E) using:

Three M8 Flat Washer (#24)

Three M8 Nylon Lock Nut (#25)