Instructions / Assembly

Console Operation
MODES
Setup Mode: When Powered on, the console beeps and then goes into setup mode.
Sleep Mode: When RPM Signal or Data is not detected for 4 minutes, it will
automatically enter Sleep Mode. Pedal again or press any button to start the
program again.
USER SETUP MODE
When entering the program, You have the option of entering your own personal
settings (Gender, Age, Height, Weight).
1. In the Setup Mode, hold the Reset Button until it display “U0” on the screen.
(Figure #1 & #2)
2. Press Increase or Decrease Buttons to choose from U0 ~ U4 and then
press Enter Button.
3. Press Increase or Decrease Buttons to choose the Gender and then press
Enter Button.
4. Press Increase or Decrease Buttons to adjust the Age and then press
Enter Button.
5. Press Increase or Decrease Buttons to adjust the Height and then press
Enter Button.
6. Press Increase or Decrease Buttons to adjust the Weight and then press
Enter Button.
19
Figure #1 Figure #2