Lunar INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation. Touch Switch Application Installation should be carried out by a qualified electrician. Do NOT strike mirror glass with hard or pointed items. LED Light soft, dry.non abrasive cloth. Do NOT use cleaning agents V1o, o0, L0 Light is O Fuse single finger to Short Touch the Switch Button, the LED Light will be turned ON. or abrasive materials on of finished surface.
Lunar INSTALLATION INSTRUCTIONS 1.Before your installation, make sure the location of the mirror is suitable, ensuring that the domestic main power supply is within reach of the electrical Installation procedure 2.Use a soft pencil to mark the position of the mirror on the wall, and it is very important to make sure it is level. Remove the mirror and mark the mounting points. Keep 3.Drilling holes in the marked positions by using a suitable tool, and then insert the wall plugs on the surface of the wall.
Lunar INSTALLATION INSTRUCTIONS Installation procedure 4.You must have a Junction box in the wall. Carefully connect the domestic main power supply to the terminal box according to the wiring diagram (Fig. 4} overleaf, Always remember that the domestic electrical main power supply to which the mirror is being connected is TURNED OFF during the installation.