SDS

ManualsBrandsUnbranded ManualsCFL Light Bulbs60W Equivalent Yellow Candelabra Base Spiral CFL Light Bulb (12-Pack)

1 of 3

MATERIAL SAFETY DATA SHEET

COMPACT FLUORESCENT LAMPS

Compact Fluorescent Lamps, manufactured or distributed by FEIT ELECTRIC COMPANY, are

exempted from the requirements of the OSHA Hazard Communication Standard (29 CFR

1910.1200) because they are “articles”. The following information is provided by FEIT ELECTRIC

COMPANY as a courtesy to its customers.

--------------------------------------------------------------------------------------------------------------------------

I. PRODUCT IDENTIFICATION

--------------------------------------------------------------------------------------------------------------------------

Trade Name (as labeled): Compact Fluorescent Lamps

Manufacturer FEIT ELECTRIC COMPANY

4901 Gregg Road

Pico Rivera, CA 90660

(562) 463-2852

------------------------------------------------------------------------------------------------------------------------------------------------

II. HAZARDOUS INGREDIENTS

------------------------------------------------------------------------------------------------------------------------------------------------

THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO LAMPS THAT ARE

INTACT. The following materials, unless specified otherwise, are part of the glass bulb portion of the CFL unit

and the entire CFL. The % weight, unless specified otherwise, is relative to the glass bulb portion of the CFL

and the entire CFL unit. If the glass bulb is broken, the following materials may be released:

Chemical Name CAS Number % by wt. Exposure Limits in Air (mg/cubic m)

ACGIH (TLV) OSHA (PEL)

Glass (Soda-Lime) 8006-28-8 98 10.0 (2) 15.0 (2)

(1,4) Mercury 7439-97-6 <0.02 0.025 0.1 Ceiling

(1,3) Lead Oxide 1317-36-8 0.2-2.0 0.05 0.05

Aluminum Oxide 1344-28-1 0-2.0 10.0 (2) 15.0 (2)

(1,4,6) Lead Solder (as Pb) 7439-92-1 0-0.4 0.05 0.05

(5) Krypton-85 7439-90-9 0-<0.01 --- ---

Fluorescent Phosphor --- 0.5-3.0 10.0 (2) 15.0 (2)

may contain:

(3) Barium Compounds (as Ba dust) 7440-39-3 0-0.1 0.5 0.5

(3) Manganese (as dust) 7439-96-5 0-0.1 0.2 5.0 Ceiling

(3) Yttrium Oxide (as Y dust) 7440-65-5 0-0.5 1.0 1.0

(1) These chemicals are subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and

Reauthorization Act of 1986 and 40 CFR Part 372

(2) Limits as nuisance particulate

(3) These elements are contained in the material as part of its chemical structure; the material is not a mixture.

(4) The mercury and lead in this product are substances known to the stat of California to cause reproductive toxicity if

ingested. [California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65).]

(5) This radioactive isotope is found in the glass encapsulated starting switch mounted only in the base of CFLs.

(6) This material is found only on the base of the CFL’s ballast/adapter unit and the % weight is relative to the entire lamp &

ballast/adapter unit

------------------------------------------------------------------------------------------------------------------------------------------------

Product Safety Data Sheet for FEIT ELECTRIC COMPANY brand Compact Fluorescent Lamps PSDS No. 1.1.5

------------------------------------------------------------------------------------------------------------------------------------------------

Summary of content (3 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET COMPACT FLUORESCENT LAMPS Compact Fluorescent Lamps, manufactured or distributed by FEIT ELECTRIC COMPANY, are exempted from the requirements of the OSHA Hazard Communication Standard (29 CFR 1910.1200) because they are “articles”. The following information is provided by FEIT ELECTRIC COMPANY as a courtesy to its customers. -------------------------------------------------------------------------------------------------------------------------I.
PAGE 2
III. PHYSICAL PROPERTIES ----------------------------------------------------------------------------------------------------------------------------- ------------------Not applicable to intact lamp. -----------------------------------------------------------------------------------------------------------------------------------------------IV.
PAGE 3
EMERGENCY AND FIRST AID PROCEDURES Glass Cuts: Perform normal first aid procedures. Seek medical attention as required. Inhalation: If discomfort, irritation or symptoms of pulmonary involvement develop, remove from exposure and seek medical attention. Ingestion: In the unlikely event of ingestion of a large quantity of material, seek medical attention Contact, Skin: Thoroughly wash affected area with mild soap or detergent and water and prevent further contact. Seek medical attention if irritation occurs.