Installation Guide

USSHOVEL.COM
07.08.2020
DARE Innovative Tools
Assembly Instructions for BR18SMM, BR18SMF & BR18SMR Models.
Hello,
We thank you for selecting your DARE INNOVATIVE TOOLS
STRAIGHT BACK BROOM. Assembly is minimal and can be
easily done by following the few simple steps below:
Components List:
1. 2-Handed Hand-grip
2. Handle
3. Broom head
4. Assembly fasteners
Assembly:
1. To attach handle to the broom head.
a) Loosen screw located on broom head with a Phillips-
head screwdriver.
b) Completely insert and thread handle into broom
head.
c) Securely retighten screw.
2. To attach your STRAIGHT BACK Hand-grip to handle.
a) Loosen screw/s located on Hand-grip with a Phillips-
head screwdriver.
b) Completely insert handle into Hand-grip as shown in
Fig 1.
c) Place broom on a flat non-abrasive surface to align
Hand-grip and broom head as shown in Fig. 1.
d) Securely retighten Hand-grip screw/s with a Phillips-
head screwdriver.
Maintenance:
1. Check all fasteners at frequent intervals for proper
tightness to be sure the broom is in safe working
conditions.
2. Do not use broom if any component becomes damaged.
Proper use:
Your STRAIGHT BACK BROOM provides you power,
comfort and back-pain relief like no other broom can.
a) The STRAIGHT BACK Hand-grip allows you to
maintain an upright neutral spine reducing or
eliminating lower back pain. There is no need to
bend at the waist to push your broom forward.
b) The STRAIGHT BACK Hand-grip accommodates both
hands for greater control leading to less physical
exertion and greater comfort.
Contact Info:
For assistance or comments please feel free to reach us
at - https://www.usshovel.com/contacts
Fig 1.
Fig 2.