Instructions / Assembly

BASKETBALL RETURN

Assembly Instructions

THANK YOU FOR YOUR PURCHASE.

WE VALUE OUR CUSTOMERS AND WANT TO BE SURE YOU ARE SATISFIED WITH YOUR PRODUCT.

IF YOU HAVE ANY QUESTIONS OR CONCERNS OR YOU ARE NOT COMPLETELY SATISFIED, PLEASE CONTACT OUR OFFICE AT 1-800-906-1639.

Assembly:

1. Lay Basketball Return spread out on the ground in an open space. Attach and screw the two metal rods together

and then place the green metal rod into the sleeve at the top of the net and screw and bolt into place.

2. Position the metal rod and sleeve at the bottom of the backboard, and loop the straps over the back of the rim

and pull tightly. Tie the straps to a spot that won’t move on the back of the backboard after making sure that the

metal rod is firmly touching the bottom of the backboard.

3. After the top part of the basketball return is secure, fill the sandbags located at the bottom of the return net up

with as much sand to make sure the return won’t move. Zip close the sandbags once finished filling. Begin use.

4. When finished with basketball return, store in a dry environment. Inclement weather may ware down this

product and diminish the usefulness of the product.

Part

Quantity

Net

Green Metal Rod

Screws