Instructions / Assembly

4. Place the long nose pliers into the crown slot around the inner chamber of the valve (Fig.2).

Fig. 2

5. Turn the valve anti-clockwise to loosen the outer valve head. Use the pliers only to turn the

outer valve head a couple of turns (Fig. 3) and then remove the pliers and continue to undo

the valve head with your hands (Fig. 4).

Fig. 3

Fig. 4

6. Once fully un-screwed, you can remove the outer valve head from the inner valve seat to

expose the partially un-seated sealing washer (Fig. 5).

Fig. 5

Fig. 6

7. Use your thumb to depress the inner valve sealing mechanism. You will be able to expose the

partially un-seated sealing washer (Fig. 6).

8. Using only your fingers, ease the sealing washer back into position so that it is seated within

the slot of the supporting plate (Fig. 7).

Fig. 7

9. Once you have the sealing washer back in its correct position, you can then screw the outer

valve assembly back into the inner valve seat by reversing the removal procedure.