Data Sheet

BULLS EYE

™

Highly Effective,

Single-Pass Turf Renovation.

Call your Bullseye distributor at 800-803-8676

The Bullseye NuSurface 470 & 790 are used to fraise mow, flail

mow, level, de-thatch, and renovate turf areas, as well as harvest

sprigs. These products are ideal for use on golf courses and sports

fields and are quickly becoming the go-to grass removal tool for

fast and efficient resurfacing projects. It’s rotary action removes

material and transfers it onto a conveyor system for disposal, leaving

behind a smooth surface, immediately ready for sod or seeding.

These machines are highly productive and can be adjusted in small

increments for the desired level of aggresiveness. Rather than

swapping out the entire blade mount rotor to change mowing

operations, a cost effective optional verti-cut blade set

is easily installed to replace the standard fraise/flail

mowing blade set.

FEATURES

NuSurface

™

47 0 /790

MULTI-PURPOSE TURF RENOVATION

• Cost Effective, Multi-Purpose Turf

Renovation – verti-cut, flail mow or

fraise mow and clean up in single pass

• Operating Width Options –

47” or 79” (119 or 200 cm)

• Multi-Purpose Blade Rotor –

simple blade change to switch

between fraise or flail mow and

verti-cut

• Adjustable Height Conveyor – works

with most trailers or dump boxes

• Full Width Front and Rear Rollers –

easily adjust depth and level machine

on all four corners

• Easy Access to Blade Area – simplifies

blade changes and cleaning

PAGE 1
BULLS EYE NuSurface 470/790 ™ ™ FEATURES • Cost Effective, Multi-Purpose Turf Renovation – verti-cut, flail mow or fraise mow and clean up in single pass • Operating Width Options – 47” or 79” (119 or 200 cm) • Multi-Purpose Blade Rotor – simple blade change to switch between fraise or flail mow and verti-cut • Adjustable Height Conveyor – works with most trailers or dump boxes • Full Width Front and Rear Rollers – easily adjust depth and level machine on all four corners • Easy Access to Blade A
PAGE 2
BULLS EYE ™ NuSurface 470/790 ™ * The Bullseye NuSurface 470 & 790 are used to fraise mow, flail mow, level, de-thatch, and renovate turf areas, as well as harvest sprigs. These products are ideal for use on golf courses and sports fields and are quickly becoming the go-to grass removal tool for fast and efficient resurfacing projects. It’s rotary action removes material and transfers it onto a conveyor system for disposal, leaving behind a smooth surface, immediately ready for sod or seeding.