Full Product Manual

CBO-500 Assembly Instructions

After the Galvannealed Steel Plate has been set and the

Insulation Boards placed on top of it, you are now ready

to set the Hearth into place. Line the Front Hearth piece

up with the front of the Oven base. As you can see, the

Insulation Boards are not exposed to the elements and

cover the entire Main Hearth.

Push the Main Hearth into place so there is a tight fit with

the Front Hearth.

Remove the Front Hearth piece and place the Dome over the

top of the Main Hearth. Make certain the front of the Oven

is lined up, then replace the Front Hearth. Attach the Anchor

Plate to the top of the Oven.

Lay the Insulating Blanket over the top of the Oven. Cut

out a hole for the Flue Pipe, and cut the Insulating Blanket

to line up with the front of the Oven. If you have any extra

insulation, put it on the top of the Oven.

Note: Industrial-grade aluminum foil may be placed over the

insulation for moisture protection.

Note: It is important that you use all of the insulation

supplied to avoid a possible fire.

Cut the back of the Insulating Blanket with a razor blade

and tuck it into place. Pull the sides of the Insulating Blanket

around the back of the Oven. You can tie the insulation with

metal straps, or aluminum tape, or just leave it in place.