Datasheet

CFDISK.5x dimensions
This version is designed to plug directly onto an IDE header, using a right angle female header (adapter at a
right angle to the PCB). Power is supplied by a floppy power connector. The CF card extends beyond the
PCB, so this solution is not suitable for 1U chassis. Not recommend for high vibration environments. No
master / slave selection.
This board can also be ordered with a straight 40 pin header (CFDISK.5GS) In this configuration, the
adapter is coplanar (parallel) with the system board, with the CF header facing down.
Change history:
CFDISK.5H Added IDE DMA support.
CFDISK.5G Change of CF header for lower cost
CFDISK.5F Special version with 180 degree rotated data connector (special order)
CFDISK.5D Made in Taiwan
CFDISK.5C Assembled in USA, all ceramic bypass capacitors, change CF header
CFDISK.5B Assembled in USA, change electrolytic cap to SMT, turn IDE connector around,
use keyed connector
CFDISK.5A Assembled in USA, non-keyed connector (different orientation)