Instructions / Assembly

To fill the fuel tank
1. Clean the area around the fuel tank cap.
2. Shake the container and make sure that the fuel is
fully mixed.
3. Fill the fuel tank.
4. Tighten the fuel tank cap carefully.
5. Move the product 3 m (10 ft) or more away from the
refueling area and fuel source before starting.
CAUTION: Contamination in the tanks
causes malfunction. Clean the fuel tank
regularly and replace the fuel filter one
time a year or more.
Before you operate the product
•
Examine the work area to make sure that you know
the type of terrain. Examine the slope of the ground
and if there are obstacles such as stones, branches
and ditches.
• Do an overhaul inspection of the product.
• Do the safety inspections, maintenance and
servicing that are given in this manual.
• Make sure that all covers, trimmer guard and
trimmer head correctly attached and not damaged or
cracked. Replace if they are exposed to impact or
cracked.
WARNING: Do not use the product without a
guard or a guard that is defective.
To start a cold engine
2.
Push the air primer bulb 6-10 times .
3. Move the choke control up into choke on position.
Primer Bulb
1.
Push the switch button up open the engine .
4. Pull the starter rope until the engine warm up .
5. Push the choke control down into the choke off .
Warm up ( Engine start / Try to start ) .
14
Pull Max 6 times .