Instructions / Assembly

Stinger User Instructions.

Key Less, Live More!™

Teamxiq.com

Example

Vehicle Operation

1. Enter the code. (the first time, enter the last four digits found on the KEEP IN SAFE PLACE

card) In this example for Stinger 170100206, the User code would be: 3433.

2. Press red START/STOP button in the center.

3. The Stinger beeps 2 times.

4. The battery monitor LEDs should provide an indication of battery voltage level.

○ a. All 4 LEDs lit means the battery is fully charged.

○ b. 1 LED blinking means the battery is nearly drained.

5. To deactivate the Stinger, press the START/STOP button again.

Note: if the wrong User code has been entered three consecutive times, the Stinger will beep for about one minute before you are able to

reenter the User code.

Change/Update User code

1. Make sure the Stinger is OFF.

2. Enter the 8 digit Mastercode (found on the KEEP IN A SAFE PLACE card) In this example for

Stinger 170100206, the Mastercode would be: 43123433.

3. The battery meter should start blinking if you entered it correctly.

4. Now enter the new four digit User code, then press the start/stop button to turn the Stinger OFF.

5. Your new User code is now ready to be used and the old one is deleted.

PAGE 1
Stinger User Instructions. Key Less, Live More!™ Teamxiq.com Example Vehicle Operation 1. Enter the code. (the first time, enter the last four digits found on the KEEP IN SAFE PLACE card) In this example for Stinger 170100206, the User code would be: 3433. 2. Press red START/STOP button in the center. 3. The Stinger beeps 2 times. 4. The battery monitor LEDs should provide an indication of battery voltage level. ○ a. All 4 LEDs lit means the battery is fully charged. ○ b.