Troubleshooting Guide

CM300/ Booster Fan Plus Maintenance

You will need: #2 Phillips Screwdriver, motor oil or a long lasting lubricant

Step 1: Using the #2 Phillips screwdriver, remove the 4 screws on the exterior of

the unit

Step 2: Remove the product housing to expose the interior

PAGE 1
CM300/ Booster Fan Plus Maintenance You will need: #2 Phillips Screwdriver, motor oil or a long lasting lubricant Step 1: Using the #2 Phillips screwdriver, remove the 4 screws on the exterior of the unit Step 2: Remove the product housing to expose the interior
PAGE 2
Step 4: Pull the fan away from the housing to expose the lubricant reservoir Step 5: Take some time to clean the unit of any dust/ debris trapped on the fan blades *Compressed air can be used to do this **A damp cloth can be used to clean the housing and external components Step 6: Using motor oil or another long lasting lubricant, apply 1 to 2 drops into the centre of the lubricant reservoir. Wipe away any excess lubricant and return the lubricant reservoir to the end of the fan blade housing.