Troubleshooting Guide

Step 4: Pull the fan away from the housing to expose the lubricant reservoir
Step 5: Take some time to clean the unit of any dust/ debris trapped on the fan blades
*Compressed air can be used to do this
**A damp cloth can be used to clean the housing and external components
Step 6: Using motor oil or another long lasting lubricant, apply 1 to 2 drops into the centre of
the lubricant reservoir.
Wipe away any excess lubricant and return the lubricant reservoir to the end of the fan blade
housing.
Make sure to firmly secure the lubrication reservoir to the motor housing when finished.
Reverse these steps to put the unit back together and test the Booster Fan.
Cyclone Range Hoods Inc.
[e-mail]
1-888-293-5662