Specification
Material Safety Data Sheet
Section 5 – Health Hazard Data
Effects of Acute Overexposure: None Expected.
Emergency First Aid Procedures: If burned by molten material, cool as quickly as possible with water and see a physician for
removal of adhering material and treatment of burn
Smoke or Dust Inhalation: Remove to fresh air and consult a physician.
Section 6 – Reactivity Data
Stability: Stable material.
Conditions to Avoid: None known.
Incompatibility (Material to avoid contact with): None known.
Hazardous Decomposition By-Products: Thermal decomposition and burning may produce Carbon Monoxide, Carbon Dioxide, and
Hydrogen Bromide.
Hazardous Polymerization: Will not occur.
Section 7 – Spill or Leak Procedures
Steps To Be Taken In Case Material Is Released Or Spilled: Sweep up and return to container or discard if contaminated.
Waste Disposal Method: Solid waste disposal in accordance with Federal, State, and Local Regulations.
Section 8 – Special Protection Information
Respiratory Protection: Particulate Mask. If dusting occurs, use chemical respirator.
Ventilation: Local exhaust, good building ventilation.
Special Ventilation Requirements: None, however dust creation should be minimized.
Hand/Skin Protection: Cloth gloves to prevent cuts and scrapes from edges.
Eye Protection: Safety glasses or chemical goggles.
Other Protective Equipment: None needed.
Section 9 – Special Precautions or Comments
Precautions to Take In Handling and Storage: None. Normal bulk storage and handling of plastic. Do not expose materials to
excessive heat, cold, or moisture.
Shipping Designation: Plastic sheets, flat.
D.O.T. Class/Number Required: Not regulated.
IMPORTANT NOTE:
This Material Safety Data Sheet supersedes all previous issues. Information and recommendations contained herein are based on
sources considered to be dependable, and is accurate and reliable to the best of our knowledge. Since; however, safety data and
standards, as well as government and state regulations are subject to change, and the conditions of handling and use, misuse are beyond
our control, no guarantee or warranty of any kind, expressed or implied, is made.
If there are any questions concerning this Material Safety Data Sheet, please contact:
COROPLAST, INC.
800-666-2241 OR 972-392-2241 in Dallas
or
800-361-5150 OR 450-378-3995 in Canada