Posts INSTALLATION INSTRUCTIONS Please review ALL diagrams and instructions in full prior to beginning installation. 3.5” min. 5.5” m Pedestrian gates are up to 4’ wide and up to 7’ tall. Gate and posts should be aligned as needed to accommodate hinges and / or latching mechanisms. Refer to appropriate installation instructions and / or design documents prior to beginning installation. Pressure treated posts are recommended for subgrade post installation. in. Gate in closed position, 5.
Jambs INSTALLATION INSTRUCTIONS Please review ALL diagrams and instructions in full prior to beginning installation. Due to the wide range of surfaces, fasteners are not provided. For masonry applications, 3/8” Hex Head Lag Bolts with 3/8” washers and proper anchors/shields are common to mount the jambs. Other anchoring systems may be suitable. Follow manufacturers instructions. If the walls/posts are not plumb, you can shim the jambs as needed during installation to remedy.
Self-Closing Butt Hinges INSTALLATION INSTRUCTIONS Please review ALL diagrams and instructions in full prior to beginning installation. Use this instruction in place of those inside of the hardware box. BUTT HINGE INSTALLATION Install hinges before latching is installed. 1) Place gate in opening using spacers at sides and bottom to achieve necessary gaps. 2) If using self-closing butt hinges, install with adjustment keyhole facing up (located on one end of each hinge barrel).
Hampton Thumb Latch, Yard Swing INSTALLATION INSTRUCTIONS Please review ALL diagrams and instructions in full prior to beginning installation. Use this instruction in place of those inside of the hardware box. LATCH INSTALLATION Install Latch after gate and hinges are installed. PADLOCK EYES INSTALLATION Optional - If Gate needs to be locked 1) Install one padlock eye on the inside edge of the latch post/ jamb and the other on the gate edge. The two should align when door is in closed.
Gate Care & Maintenance Thank you for choosing us for your new gate. You have chosen one of the finest cedar gates available and we hope that you enjoy it for many years to come. The Wood – Western Red Cedar Your gate is constructed from Western Red Cedar, which is a superior outdoor wood. Cedar is well reputed for its resistance to rotting and insects. We use only kiln-dried lumber, which promotes dimensional stability.