Instructions / Assembly

OIL AND FUEL
Engine Oil
1
1. Remove the oil ll plug (1)
1
2
Fuel level
Filler neck
FUEL
Fill with gasoline up to the bottom of the
ller neck.
6
Fill level
2. fill with SAE 10W-30 motor oil. This
mini bike takes .63qt. (.6L) of engine oil.
Oil should be up to the brim of the ll hole.
3. Re- install ll cap, Start engine and
allow to run for a few minutes, Re-check
oil level and ll accordingly.
Filling with Oil
Mini bike DOES NOT have oil in
crankcase when shipped from
the factory.
NEVER ATTEMPT to start the
engine without engine oil.
Caution: Do not over or
under fll with Motor Oil
Never use leaded gasoline in this product.
It could affect the engine’s emissions and
damage the engine.
Mini Bike requires clean unleaded regular
gasoline with a minimum octane rating of
90 or higher.