CAUTION Read the Rules for Safe Operation and Instructions Carefully. WARNING 1. To reduce the risk of fire or electrical shock, do not use this fan for any solid state speed control device. 2. If the power cord is damaged, it is strongly recommended to be repaired by a qualified person. 3. This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. If an adapter is used to connecting three-blade grounding-type plugs to two-slot receptacles.
Back grill(6) 1 2 Motor Housing(5) 3 4 Figure.1 Figure.2 4. Mount the Blade (7) onto the motor shaft through the center hole in the Blade (7). Lock the Blade (7) to the motor shaft by attaching the Spinner by turning counterclockwise onto the shaft (see Fig.4) Spinner Blade (7) Figure.4 Figure.3 5. Remove the Grill Ring from the front grill by unscrew the screw holding it. Place the Front Grill against the Back Grill and push together until the tabs on the grills hold them together. Fig. 5.
OSCILLATION To allow the fan to oscillate, push the Knob on the motor housing. Pull up on the knob if oscillation is not desired. Figure.8 ADJUSTMENT To adjust the angle the fan is blowing. Figure.9 1. Loosen the adjustment knob under the fan motor. 2. Adjust the fan to the angle desired and retighten the knob to secure the fan at that angle. Figure.8 Adjustment knob USER SERVICING INSTRUCTIONS Figure.9 a) Grasp plug and remove from the receptacle or other outlet device.
