Manual
15
D. Use the + or – button to select the Day Interval (1–30 days).
E. Press the
NEXT
button. The controller displays TODAY and its
current setting.
F. Use the + or – button to select the desired setting for today.
This section includes instructions for the following controller operations:
• % Season Adjust
• Manual Operations
• Off and Rain Delay Modes
% SEASON ADJUST
The % Season Adjust feature enables you to easily increase or decrease
the station run time (by percentage) of all
stations assigned to a
selected program. This is handy for making temporary, overall station
run time adjustments without changing the original run time settings.
% Season Adjust values range from 0 to 200% in 10% increments,
with 100% being the normal setting.
For example, as the fall season approaches and the temperature
decreases, you may want to reduce the station time for the stations in
program A by 30%. Later you can return station times to their original
values by setting the % Season Adjust value back to 100%.
Note: It is possible to inadvertently cause start time stacking when
increasing station run time. Careful planning and use of % Season
Adjust will prevent this from happening.
To change the % Season Adjust percentage value of a selected
program:
1. Turn the function dial to the
% Season Adjust
position.
2. Select Program
A
,
B
,
C
or
D
with the
Program
switch.
3. Use the
+ and/or – buttons to increase or decrease the percentage
value (0–200%).
4. Turn the function dial to the
Run
position.
Note: The controller displays the % symbol in the
Run
position when % Season Adjust is in use for any
program. During operation, the adjusted run time will be
displayed.
OPERATING THE CONTROLLER
Operating the Controller