Manual

i
Thank you for purchasing a Custom Command controller. Listed
below are some important features you should be aware of before you
begin programming. Details on how to implement these features are
described on the following pages.
• Four fully independent programs that can run concurrently
• Watering programmable for days of the week, odd days, even days
or intervals from 1 to 30 days. Selective removal of days from the
Odd/Even schedule
• 365-day calendar, with automatic compensation for leap year
• Sixteen total start times to use in any program
• Start time stacking overlap protection within each program
• Station watering time from 0 minutes to 10 hours in 1-minute
increments
• Program erase independent for each program
• Non-volatile memory that retains programmed information for up
to 30 years in the event of a power failure
• Accurate time and date retention during power failures for up to 90
days continuous via a 9-volt alkaline battery (included)
• % Season Adjust from 0 to 200% in 10% increments
• Rain delay programmable to 7 days
• Self-diagnostic electronic circuit breaker that identifies and over-
rides faulty stations
• Master valve/pump start operation selectable per program
• Complete manual operations available by station and program
• Sensor switch-ready for operation with any normally-closed rain
switch device
• Slide switch control provided for rain switch sensor override
• Unique modular design for ease of installation and service
To take full advantage of all Custom Command features, please review
the User’s Guide completely before installing or programming your
new controller.
FEATURES
Features