Full Product Manual

Initially, the dirt canister should be checked or emptied weekly until some idea can be
?
obtained as to how long it takes to half ll the canister under your normal cleaning routine.
All vacuum systems will function more eectively if the dirt can is emptied frequently.
Under no circumstances should you allow your dirt canister to become more than 3/4
full before emptying.
Note: The canister will ll more rapidly if NEW carpets are being cleaned for there is usually a tremen-
dous quantity of loose bers that are retained in the carpet from the manufacturing process. In some
instances it may take several months before all of these loose bers are removed.
HOW OFTEN SHOULD I CHECK OR EMPTY MY DIRT CANISTER?
A: To remove the ELECTRO-STATIC Screen (ES-
1200/ES1240):
Remove the lid from the canister, then lift the
screen up over the stand pipe.
B: To Clean:
The ELECTRO-STATIC Screen can best be cleaned by
vacuuming, tap water rinsing, or dousing in an ordi-
nary detergent solution. NOTE: Before replacing the
ELECTRO-STATIC Screen, be sure it is dry.
C: To replace the ELECTRO-STATIC Screen (ES-
1200/ES1240):
Place the screen over the standpipe - push down
to insure it seats on the metal screen. Replace the lid
and operate normally.
2” O.D.
INLET
STANDPIPE
PLASTIC
CONE
ELECTRO-STATIC
SCREEN
(ES-1200/
ES1240)
REMOVABLE TOP
2” O.D.
INLET
STANDPIPE
PLASTIC
CONE
ELECTRO-STATIC
SCREEN
(ES-1200/
ES1240)
REMOVABLE TOP
A: To remove the Fine Mesh Screen (FSF12/
FSF14):
Remove the lid from the canister, then lift the
screen up over the stand pipe.
B: To Clean:
The Fine Mesh Filter Screen can best be cleaned
by tapping or brushing o the screen.
C: To replace the Fine Mesh Filter Screen
(FSF12/FSF14):
Place the screen over the standpipe - push
down to insure it seats on the metal screen.
Replace the lid and operate normally.
Servicing the ELECTRO-STATIC Screen - OPTIONAL
Servicing the Fine Mesh Filter Screen - STANDARD
SERVICING FILTER SCREENS ON DIRT CANS
www.centralvacuumstores.com 12