Installation Guide

TYPICAL INSTALLATION - POWER UNITS
NOTE: Exhaust should be vented outdoors using 2" tubing - Exhaust air should not be vented
into a wall, ceiling or a concealed space of a building.Mount power unit such that cord may be directly
plugged into receptacle or have new receptacle installed. DO NOT use an extension cord.
MODEL CV280/CV300
*
Use PF-242
45° Street Ell
Paper Bag
Cardboard Collar.
Push cardboard
collar up until it fits
into the groom of
plastic fitting.
Plastic fitting groove
Paper bag
Rubber seal
Paper bag
Plastic fitting.
Push into 2" open-
ing until collar of
fitting is tight up
against unit hous-
ing
MODEL CV700/CV800