Use and Care Guide
About is Plant
Screening shrubs are a necessity in all types of landscapes to provide privacy in urban settings or establish
wind breaks in large open spaces. Taller varieties also furnish a vertical element to landscapes, drawing
the eye upward. Use screening shrubs to divide large spaces and create cozy secluded hideaways, block
street noise, or hide unattractive views. Tall screens can also aord protection from the wind which can
substantially reduce energy consumption in the wintertime. Screening shrubs should be evergreen (green
year round), with a mature height of at least 6 feet, and have foliage from top to bottom.
How to Plant
• Prepare the area for planting by conditioning the soil. Loosen the soil and incorporate an organic soil
conditioner according to directions.
• Dig a hole 2 times the width of the root ball and a depth slightly less than the height of the root ball. Allow
the top surface of the root ball to rest 1/2 inch higher than the soil line.
• For container grown plants, carefully remove plant by squeezing container and slowly removing the root
ball. Never pull on the plant trunk. Instead let the root ball slide out by tipping the container. If the plant is
heavily rooted, loosen roots by gently pulling a few away from the root ball. is encourages stronger root
growth. Set root ball in hole making sure the top of the root ball is slightly higher (1/2 inch) than ground
level. Place soil mix under root ball if too low. Backll soil mix around plant to ground level and tamp
lightly removing all air pockets.
• For biodegradable pots, follow the directions on the container.
• For bare root plants, trim any broken, twisted or discolored tips. Determine the original soil line by the
change in color on the plant trunk. Set the plant in the hole so the soil line is above the surrounding soil.
Space the roots evenly. Backll soil mix around and between the roots and tamp lightly removing all air.
• Water thoroughly to settle the soil around the plant. Add more soil mix around plant if necessary aer
watering. Apply root stimulator to encourage new root growth and fast establishment.
• If a large plant; build a soil ring around the plant, 6" beyond the edge of the hole, to use as water reservoir
to assist in watering until established.
• Add a 2-3" layer of mulch around plant to conserve soil moisture and eliminate future weeds.
• For large shrubs, it may be necessary to secure the trunk by using three stakes placed at equal distances
around the plant.
How to Water
• New plants require more frequent watering than established plants. Aer planting check for water regularly
until fully rooted and established.
• For large plants; build a soil ring around the plant to use as a water reservoir. is will assist in watering
until the plant is established.
• Always water slowly and deeply making sure the root ball is completely saturated.