Use and Care Manual

CLEANING AND MAINTENANCE

 Turn power off and unplug before cleaning

 Clean water tank once a week

 Take out water tank and separate mist pipe, spray cone if humidifier needs cleaned

 Empty excess water and use detergent for hard water stains inside the sink, dry

with a cloth

 Put 2-3 drops of machine oil in the motor shaft

 Store fan in a cool and dry place

INSTALLATION

1. Aromatherapy cover

2. Aromatherapy box

3. Front mist cover

4. Rear mist cover

5. Front fan guard

6. Fan blade lock

7. Fan ring

8. Fan blade

9. Guard lock

10. Rear fan guard

11. Motor

12. Positioning knob

13. Fan body

14. Base

15. Castor

16. Base lock

17. Anion hole

18. Mist pipe

19. Mist connector

According to the above installation diagram, install as follows:

Step 1: Insert the castor (#15) into the base (#14)

Step 2: Insert the motor (#11) into the fan body (#13) and position the knob (#12) to

fixed motor (#11)

Step 3: Insert fan body (#13) into the base (#14) and tighten the base using the base

lock (#16)

Step 4: Attach rear fan guard (#10) to the motor (#11) and tighten guard lock (#9)

Step 5: Insert fan blade (#8) into the motor shaft, then tighten the fan blade lock (#6)

by turning it counterclockwise

Step 6: Attach the front fan guard (#5) to the fan ring (#7) and align with rear fan

guard (#10) pressed and secured into front fan guard (#5)

Step 7: Insert one side of the mist pipe (#18) into the front mist cover (#3) and

attach the other side to the mist connector (#19)