Installation Instructions

Always remove spark plug wire from spark plug and drain gas from mower
tank before working on blade. Make sure plug is kept far enought away from
plug that spark cannot jump from wire to plug.
For the greenest lawns, it is important to change and sharpen the lawn
mower blade at least once a year.
A dull blade will tear at the grass, damaging each blade of grass and a whitish
sheen across the lawn. A sharp blade will make a clean cut, leaving a deep, even
green over the entire lawn.
CAUTIONS:
Place blade removal tool over mower blade and side of mower deck.
Tighten clamping screw onto mower deck until firmly in place and not moving.
Keeping hands away from edges of blades, loosen the blade nut and remove blade.
After attaching mower blade, loosen clamping screw and remove blade removal
tool from mower deck. Then fill mower with gas and reattach spark plug wire to
spark plug.
INSTRUCTIONS:
INSTRUCTION MANUAL
FOR
275-5000 BLADE REMOVAL TOOLS
!