SDS

MATERIAL SAFETY DATA SHEET (MSDS)
1 Name 10#White Mineral Oil Common name
Manufacturer Shanghai Jin Hai Special Lubricating Oil Factory
Add: No.239, Jihe Road 3399, Huaxin Town, Qingpu District, Shanghai Tel:
021-59792217
2 Component Basic oil mixture
：
99%
，
Additive mixture
：
1%
，
This product does not
contain harmful and toxic substances.
3 Fatalness Category: C-class combustible liquid, should be far from the heat, open flame
is strictly prohibited.
4 First Aid Treatment Skin Contact: Wash with soap.
Eye Contact: Immediately flush eyes with plenty of water and go to hospital.
Inhalation: Be harmful and go to hospital immediately.
Doctor notice: Treatment according to the patient's symptoms.
5 Fire Fighting
Treatment
Fire extinguisher: Use foam, dry powder, carbon dioxide spray fire
extinguisher; Sand or mud is only used for a small-scale fire.
Inapplicable fire extinguisher
：
Water
Fire Fighting instructions
：
Must wear self-contained breathing apparatus
when approach fire point in sealed space.
6 Leak Emergency
Treatment
Protective treatment: When the leak occurs, use protective equipment to clean
the leaked oil; If small qty, can use sand and mud or other suitable adsorption
material to absorb; Pump the oil into container if large amount of leak.
7 Transport and Storage Transport Procedures: Loading and unloading slightly, no impact; Should
wear protective shoes and use suitable loading tools when using bucket to
load the oil.
Storage: Store indoor, away from heat, open flame, not expose under
sunlight
and rain
.
8 Personal Protection Eye Protection: If any possible of splashing, please wear protective safety
goggles or full face mask.
Hands Protection: Wear impervious gloves.
Body Protection: Wear impervious clothing and shoes, or other protective
clothing according to circumstances.
9 Physical and
Chemical Properties
Appearance: White oil
D
ynamic Viscosity (40 ) mm2/ S: 9℃
～
11
Flash point(opening) : No less than 140℃
Pour Point : Below -5℃
Moisture %: N/A
10 Stability and
Reactivity
Stability: Stable (room temperature)
Avoid the conditions and material: Avoid extreme temperature, straight
sunlight, acidic materials or strong oxidizing agents.
Hazardous Analyte: No dangerous analyte under normal storage conditions.
Polymerization: Will not occur.
11 Toxicological
Information
It is non-toxic product by the acute toxicity test.
12 Ecological
Information
13 Disposal Treatment Classified recycling in accordance with regulations, save energy.