Item #000-000 Model #SW1478 ORB USE AND CARE GUIDE DURANGO 52 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HOMEDEPOT.
Table of Contents Operation .....................................................................15 Remote Control Operating Instructions...........................15 Reverse Function Button Operating Instructions ..............15 Installing the Remote Control Holder .............................16 Table of Contents ..........................................................2 Safety Information .........................................................2 Warranty ..............................................
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of 15 years after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below.
Pre-Installation (continued) PACKAGE CONTENTS G M H I A N B J C O D K E P F Part Description L Quantity 5 Part I Description Blade holder Quantity 5 A Blade B Mounting bracket 1 J Light kit plate 1 C Canopy 1 K 17W LED asembly 1 D E Canopy cover Hanger ball (preassembled) 1 1 L M Glass shade Receiver 1 1 F Downrod (preassembled) 1 N Remote control 1 G Couping cover 1 O Remote control holder 1 H Fan motor assembly 1 P 12V Battery 1 5 HOMEDEPOT.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly — Hanging the Fan 1 2 Attaching the mounting bracket to the electrical box WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. □ □ Place the slots from mounting bracket (B) over the two screws provided with the outlet box. Slide the mounting bracket (B) until it locks in place at the narrow section of the slots.
Assembly — Hanging the Fan (continued) 3 4 Attaching the coupling cover, canopy cover, and canopy to the downrod □ □ Slip the coupling cover (G), canopy cover (D), and canopy (C) onto the downrod (F). Carefully reinstall the hanger ball (E) onto the downrod (F), and ensure that the cross pin (GG) is in the correct position, the set screws (JJ) are tight, and the wires are not twisted.
Assembly — Hanging the Fan (continued) 5 Preparing the receiver and remote control WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the main fuse box before wiring. CAUTION: Do not use with a wall light dimmer switch. NOTE: If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
Assembly — Hanging the Fan (continued) 7 Making the electrical connections 1 WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the circuit breaker or main fuse box before wiring. WARNING: Check to see that all connections are tight, including the ground, and that no bare wire is visible at the wire nuts, except for the ground wire. Black White Black White Follow the steps below to connect the fan to your house supply wires.
Assembly — Hanging the Fan (continued) 7 Securing the fan motor assembly to the mounting bracket □ Remove one screw (LL) from the mounting bracket (B) and loosen the other screw (LL) approximately 1/4 turn. □ Carefully raise the canopy (C) up to the mounting bracket (B), and ensure the loosened screw (LL) is inserted into the key hole on the canopy (C). Rotate the canopy (C) clockwise.
Assembly — Attaching the Fan Blade Assemblies 8 Fastening the blade assemblies to the fan motor assembly □ Attach the fan blades (A) to the blade holders (I) by using three blade screws (AA) and fiber washers (BB). Tighten screws (AA) and fiber washers (BB) securely. □ Insert the blade holder (I) through the slots on the fan motor assembly (H). □ Attach the blade holder (I) to the fan motor assembly (H) using the blade holder screws (CC) and tighten them securely.
Assembly — Installing the Light Kit 9 10 Attaching the light kit plate to the mounting ring Attaching the 17W LED Assembly to the light kit plate □ Remove one of three screws (MM) from the fan motor assembly (H) mounting ring, and loosen the other two screws (MM), but do not remove. □ Remove one of three screws (NN) from the light kit plate (J), and loosen the other two screws (NN), but do not remove.
Assembly — Installing the Light Kit (continued) 12 Installing the glass shade □ Attach the glass shade (L) to the light kit plate (J) by twisting tightly.
Operation REMOTE CONTROL OPERATING INSTRUCTIONS Install a 12V battery (P) into the remote control (N). To prevent damage to the remote control, remove the battery if not used for long periods of time. N WARNING: Do not short-circuit, disassemble, heat up, connect improperly, or dispose of used batteries in fire. Do not recharge or mix batteries with used or other battery types. Immediately remove used batteries. Restore power to the ceiling fan and test for proper operation.
Operation (continued) INSTALLING THE REMOTE CONTROL HOLDER □ Attach the remote control holder (O) with the two remote control holder mounting screws (EE). O EE Care and Cleaning Do □ Do not Check the support connections, brackets, and blade attachments twice a year. Ensure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically.
Troubleshooting WARNING: Ensure the power is off at the electrical panel box before you attempt any repairs. Refer to the section “Making the Electrical Connections” on page 11. Problem The fan will not start. The fan sounds noisy. The remote control is not working. The fan wobbles. Solution □ Check main and branch circuit fuses or breakers. □ Check line wire connections to the fan and switch wire connections in the switch housing.
Service Parts AA I HH II J BB A B JJ K CC L KK C D E DD M F EE G N FF O GG LL MM H P Description Part Description Blade Mounting bracket AA Blade screw B BB Fiber washer C Canopy CC Blade holder screw D Canopy cover DD Balance kit E Hanger ball EE Remote control holder mounting screws F Downrod Coupling cover FF Wire nuts GG HH Cross pin Hitch pin Part A G H I Fan motor assembly Blade holder II Lock pin J Light kit plate JJ Hanger ball set screw K 17W
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
