User manual

47
Connection example 1
Door lock with access control
To avoid electrostatic discharge, always connect contact “(-) GND“ of the connector
strip 2 to a ground contact.
The “DOOR“ LED illuminates when the door opener is operated.
The connection of contact “O/P 3“ (output 3) and “O/P 1. INHIB“ (access control) can
be optionally used. User code 3 can deactivate the switching feature of the code lock
(e.g. at night, outside normal office hours). Programming is carried out in mode “61“.
When the function is active, the green“AUX“ LED illuminates.
When access control is activated, make sure that no-one is in any of the
locked rooms or buildings, because all switching functions are disabled for
the period that access control is activated.