User manual

53
Programming the system for one or more users
8900 For one user; all previous program settings are reset.
8901 For several users; all previous program settings are reset.
Programming master and user codes for one user
0 4 digits, fixed # After entering “0“ you can program the Master code
to any value. This must be 4 digits long. Press the #
key to save this.
1 4 digits, fixed # After entering “1“ you can program user code 1 to
any value. This must be 4 digits long. Press the # key
to save this.
2 4 digits, fixed # After entering “2“ you can program user code 2 to
any value. This must be 4 digits long. Press the # key
to save this.
3 4 digits, fixed # After entering “3“ you can program user code 3 to
any value. This must be 4 digits long. Press the # key
to save this.