User manual

Programming system security

70 # After the wrong code has been entered 10 times, the

device locks out access for 30 seconds..

71 # After the wrong code has been entered 10 times, the de-

vice switches contact “DURESS“ to ground. The device

remains in this state until user code 1 is entered and the

# key is pressed. You can connect a suitable telephone

dialler, a transistor switch or similar device to this con-

tact. Be sure to stay within the loading speciﬁcations

of this output

72 5 - 10 # The number of times a wrong code can be entered can

be set to a value between 5 and 10. After the speciﬁed

number of wrong code entries, the device locks out ac-

cess for 15 minutes.

This lockout can be removed prematurely by entering

the master code.

Programming system security

76 00 # Codes can be wrongly entered any number of times. No

lockout period.

Programming the door activity alarm

80 1 # Active Alarm after forceful opening (without access

code or using the door opener) the connection between

the terminal “(-) GND“ and terminal “DOOR SENS“.

80 0 # No alarm after opening the connection between the ter-

minal “(-) GND“ and terminal “DOOR SENS“.