Installation Guide

Pergola assembly instructions
www.best-redwood.com
Step 2. Attach dual support beam to posts with four bolts (7 ” x 5/16”) washers & nuts. (Match numbers).
Tap the bolt all the way into the wood to set it, then add a washer and nut and lightly tighten.
Repeat this step with the other dual support beam.
Step 3. Attach corner rafter to posts with one bolt per post (7 ” x 5/16”) washers & nuts. (Match
numbers).Tap the bolt all the way into the wood to set it, then add a washer and nut and lightly tighten.
Repeat this step in the other side (Rafter and Posts).