SDS

www.trivalent.com Powered by
00000645 SAFETY DATA SHEET Page 3
CODE: A6-000510-USAPRODUCT: Lubco Quick Wax- 490g
SECTION 09: PHYSICAL AND CHEMICAL PROPERTIES
Form.......................................................... Aerosol.
Physical Appearance................................. Fine spray mist.
Odor.......................................................... Fragrance.
Odor Threshold (ppm)............................... N/A.
Specific Gravity (Aerosol).......................... 0.910-0.970.
Specific Gravity (Liquid)............................ 0.980-1.020.
Aerosol Vapour Pressure (psig, 21°C)...... 40-50.
Vapour Density (Air=1).............................. > 1.
pH.............................................................. 7.0- 9.0.
Boiling Point liquid (°C).............................. starts 93ºC (199.40ºF).
Melting/Freezing Point (°C)....................... N/A.
Flash Point (°C), Method........................... Closed cup: -83.15 ºC (-117.7 ºF). (For propellant).
Flashback.................................................. No.
Evaporation Rate (n-Butyl Acetate = 1)
VOC Content............................................. N/A.
Solubility in water...................................... Completely.
Aerosol Flame Projection.......................... No data.
Auto Ignition Temperature (°C).................. (Propellant). 350°C (662°F).
Lower Flammable Limit (% Vol)................ (Propellant). 3.3 .
Upper Flammable Limit (% Vol)................ (propellant). 26.2.
Coefficient of Water/Oil Distribution.......... N/A.
Viscosity.................................................... Very fluid.
SECTION 10: STABILITY AND REACTIVITY
Reactivity .................................................. Product not reactive under normal conditions of use.
Chemical Stability...................................... Material is stable under normal conditions.
Possibility of Hazardous Reactions........... Will not occur.
Conditions to Avoid................................... Avoid sources of heat and flame, and electrostatic charge. Contact with incompatible
substances.
Incompatible Materials.............................. Strong oxidizing agents. Strong acids. Strong bases.
Hazardous Decomposition Products......... Carbon Monoxide, Carbon Dioxide, Phosgene, Hydrogen Chloride Gas.
SECTION 11: TOXICOLOGICAL INFORMATION
INGREDIENTS LC50 LD50
Dimethyl Ether 308 mg/L (Rat - 4hrs) Not available
D-Limonene Not available 2,000 mg/kg (Oral - Rat)
Surfactants Not available Not available
Information on Likely Routes of Exposure:
Routes of entry - Inhalation....................... Yes.
Routes of entry - Skin & Eye..................... Yes.
Routes of entry - Ingestion........................ No.
Routes of entry - Skin Absorption.............. No.
Symptoms Related to the Physical,
Chemical and Toxicological Characteristics
Acute Toxicity............................................ No known significant effects.
Skin Corrosion/Irritation............................. Causes mild skin irritation. Prolonged contact may be more irritating.
Serious Eye Damage/Eye Irritation........... May irritate eyes.
Respiratory or Skin Sensitization.............. Inhalation may cause respiratory tract irritation.
Germ Cell Mutagenicity............................. No data available to indicate product or any components present at greater than 0.1% are
mutagenic.
Carcinogenicity.......................................... No information is available.
Reproductive Toxicity................................ Based on available data, the classification criteria are not met.
STOT - Single Exposure........................... No data available .
STOT - Repeated Exposure...................... No known significant effects.
Aspiration Hazard
Chronic Effects.......................................... Repeated or prolonged skin exposure may result in moderate irritation, drying, cracking
and defatting of the skin (dermatitis).
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity................................................. May be dangerous for the environment. No data is available on the product itself. Should
not be released into the environment.
Persistence and degradability .................. The product itself has not been tested.
Bioaccumulation Potential......................... The product itself has not been tested.
Mobility in Soil........................................... The product itself has not been tested.