SDS

Product Name 23A L1028 Cascading Battery
Revision date 17-Mar-2016
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 8
STEL: 5 mg/m
3
STEL: 2 mg/m
3
STEL: 10 mg/m
3
STEL: 4 mg/m
3
Appropriate engineering controls
Ensure adequate ventilation, especially in confined areas. Remove all sources of ignition.
Individual protection measures, such as personal protective equipment
Respiratory protection
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA
approved respiratory protection should be worn. Positive-pressure supplied air
respirators may be required for high airborne contaminant concentrations.
Respiratory protection must be provided in accordance with current local
regulations.
Hand Protection
No special technical protective measures are necessary.
Eye/face protection
Avoid contact with eyes.
Skin and body protection
No special technical protective measures are necessary.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance
Solid
Color
No information available
Odor
Odorless
Odor Threshold
Not determined
pH
Not determined
Melting point/freezing point
Not determined
Boiling point / boiling range
Not determined
Flash point
Not applicable
Evaporation rate
Not determined
Flammability (solid, gas)
Not flammable
Flammability Limit in Air
Not applicable
Vapor Pressure
Not determined
Vapor density
Not applicable
Density
Not determined
Partition coefficient (LogPow)
Not determined
Autoignition temperature
Not applicable
Decomposition temperature
Not determined
Kinematic viscosity
Not determined
Dynamic viscosity
Not determined
Explosive properties
Not an explosive
Oxidizing properties
Not determined
Other information
No information available
10. STABILITY AND REACTIVITY
Reactivity
Stable under recommended storage and handling conditions (see SECTION 7, handling and storage).
Chemical stability
Stable under normal conditions.
Possibility of Hazardous Reactions
None under normal processing.
Conditions to avoid
Strong heating. Incompatible materials.