Installation Guide

Time to secure your artificial grass to the ground. Start by tucking the 1/4’’ to 1/2’’ edge you
left into the border with a metal putty knife and hammer. We recommend using 40-D 5’’
non-galvanized turf nails or staples. Using a hammer, gently tap the nail or staple until it
pierces the backing. Disperse the turf blades with fingers and drive the nail or staple into
the ground. A nail or staple should be placed every 6 inches along the outside perimeter
and every 2 feet on the inside areas. Be sure to reinforce your seamed areas with a few
nails or staples. Before you infill, make sure to brush up the turf with a power broom or
push broom. This will get the blade memory vertical.
SECURE PARAMETER
STEP 05
Meeting the proper infill requirements for the turf system you have purchased is
extremely important to the appearance, performance, and life span of your artificial
grass. Please ask your sales rep for infill requirements. There are many different types of
appropriate infill that can be used. Options include: Acrylic Coated Sand, Zeolite, Silica
Sand or Crumb Rubber. We recommend using a drop spreader to evenly disperse the
proper amount of infill.
SPREAD INFILL
STEP 06
Once the infill has been placed, using a power broom or another stiff bristled
broom brush the turf. This will assist the turf blades in standing straight up to
make your new artificial lawn look like freshly mowed grass. Repeat the process
until your infill is brushed in evenly and your seams disappear. Brushing up your
turf blades will be the only quarterly maintenance We recommend outside of
proper sanitation if you have pets. Once the infill has been placed, brush against
the grass blades to get the blades standing. Lastly, rinse the grass of all remaining
dust and infill.
BRUSH INFILL
STEP 07
INSTALL GUIDE