Product Literature

Programming Features
Up to six schedules:
– Three irrigation schedules with four start times per
schedule
– One wired auxiliary schedule, plus two optional
wireless auxiliary schedules
Monthly season adjust by schedule
Schedule stacking, with automatic split cycle when
watering adjustments are greater than 100%
Grow-In schedule is settable for up to 90 days and
automatically reverts to base irrigation schedule
Station runtimes from one minute to twelve hours
Allows 30, 60, or 90 second manual runtimes for things
such as winterization/blowouts
Programmable well-recovery, station, or pump start
delays from 10 seconds to 30 minutes
Timed water off from one to fourteen days
Compatible with normally-closed rain sensors
Automatic short detection for circuit protection and
faster troubleshooting
Non-volatile memory doesn’t require batteries and
holds programming for up to five years
Diagnostic zone test measures and displays current
draw of solenoid and identifies short, over current and
open conditions
Hardware Features
Backlit LCD display
4-station base; expandable to 16-stations with 4- and
12-station hot-swappable modules
Powerful 1.25 mA transformer can power up to 4
standard solenoids at once
Red LED next to display lights in the event of an alert
Option for 9V battery allows for armchair programming
Outdoor key-lock cabinet manufactured out of durable
UV-resistant plastic and includes standardized key used
on many of the most popular controllers
Indoor cabinet includes internal transformer and factory
installed power cord
16-station configuration with one 12 station module (EMOD-12)12-station configuration with two four station modules (EMOD-4)