Manual

2
Specications 1
Overview 3
Installation 3
EVOLUTION® Smart Connect® 3
Installing the Remote Batteries 3
At the Controller 4
Menu Navigation 4
Adding the Device 4
At the Remote 5
Set the PIN 5
Powering the Remote 5
Set the Number of Stations 5
Start Program “A”, “B”, or “C” 5
Run an All Stations Cycle 6
Turn on a Station or Zone Manually 6
Stop All Watering 6
Change From One Running Station to Another 6
Remote Auxiliary Operation 6
Switch to Auxiliary Operation 6
Start a Single Auxiliary Scene 7
Cancel a Single Scene 7
Run All Auxiliary 7
Stop All Auxiliary 7
Change From One Running Scene to Another 7
Return to Irrigation Mode 7
Toro Support 8
Table of Contents