Manual

4
Menu Navigation
• Use or to navigate the menu commands.
• To change a value, press or to move to the desired
eld, then press and to adjust the value.
• Press SELECT to input the desired value.
Adding the Device
For the EVOLUTION® Series controller and remote to
successfully communicate, identical PINs must be set in both
the controller and remote.
At the controller:
1. Press ADVANCED then .
2. Press to ADD/REMOVE DEVICE. Press .
3. Press to REMOTE.
4. Press to enter the PIN eld of the remote.
Press or to change the value.
Use or to move between the numeric elds.
5. Press to input the desired value.
6. Press to return to the home screen.
* e WEATHER sensor is not available for the Australia
region.
ZONE DETAILS
SCHEDULE STARTS
SCHEDULE DETAILS
SENSORS
ADVANCED
→
ADD/REMOVE DEVICE
→
WEATHER
*
ADD
SOIL 1 ADD
SOIL 2 ADD
SOIL 3 ADD
REMOTE 98
ADD/REMOVE DEVICE
→
14
At the Controller