Manual

7
Start a Single Auxiliary Scene
1. Turn on the remote. It defaults to
Manual mode.
2. Press or to select the
desired Auxiliary Scene (A1 - A4).
3. Press to move to run time.
4. Adjust runtime with and
.
5. Press Enter to begin auxiliary run.
e Auxiliary Scene numbers (A1, A2, and A3)
correspond with the EVOLUTION® controller’s
Auxiliary numbers (AUX 1, AUX 2, and AUX 3).
Cancel a Single Scene
Select the currently running scene and press Cancel.
Run All Auxiliary
Running all scenes is useful for troubleshooting an auxiliary
system.
1. Press several times to display
“AA on”.
2. Press Enter to turn on all
auxiliary scenes.
Stop All Auxiliary
1. Press several times to display
“AA oF” (o).
2. Press Enter to turn o all
auxiliary scenes.
Change from One Running
Scene to Another
It is possible to run more than one individual scene at a time.
Start a single auxiliary scene (above), then simply move to the
next scene and repeat the same steps. Previously running scenes
continue.
Return to Irrigation Mode
Press and hold down
Mode
PWR(Hold) until the screen displays
“toro”. Release.
Enter
Setup PWR (Hold)
Mode
Cancel
MANUAL
A2 05
SINGLE RUN MIN
TIME
Auxiliary scene 2 is set
to run for 5 minutes.
Enter
Setup PWR (Hold)
Mode
Cancel
MANUAL
AA on
Enter
Setup PWR (Hold)
Mode
Cancel
MANUAL
AA of